Mitox CS50 Instrukcja Operatora Pobierz pdf (Strona 13)

CS45 / CS50 / CS56 Chainsaw

Original Instructions Version April 12

It is important to only use good quality, fresh petrol and oil. The two-stroke fuel mixture should be

used within four weeks.

IMPORTANT

Stored two-stroke fuel may separate during storage, always shake fuel container before each use.

DO NOT USE:

• Fuel containing no oil (raw petrol) will cause the engine to become overheated and severe damage will

occur which is not covered by warranty

Fuelling

WARNING

1. Stop the engine before refuelling the unit, agitate the mixed two-stroke mixture in the

container.

2. Move at least 3 metres away from the fuelling point before starting the engine.

3. Mixed fuel which have been stored for a period of one month or more may damage/

block the carburettor resulting in the engine failing to start.

4. In the case of storing the product for a long period of time, empty the fuel tank. Next,

run the engine to empty the carburettor of fuel.

FUELLING THE CHAINSAW

1. Shake the fuel container to thoroughly mix the two-stroke oil and petrol mix.

2. Clean around the fuel cap before removing.

3. Pour 40:1 two-stroke fuel into the fuel tank with a ltered funnel, up to 80% of the fuel tanks

capacity.

4. Replace the fuel cap and tighten securely. Spilled fuel must be wiped away from the chain saw

before starting the engine.

CHAIN OIL

Use only special anti ing chain oil grade SAE30. Fill the chain oil tank every time you ll the fuel tank.

Note: Do not use waste or regenerated oil that can cause damage to the oil pump.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Brak uwag

Mitox CS50 Instrukcja Operatora Strona 13